Код: Выделить всё
apt-get remove --purge brainy-php5*
apt-get install brainy-php5-enchant brainy-php5-zip brainy-php5-imagick brainy-php5-fpm brainy-php5-gd brainy-php5-imap brainy-php5-intl brainy-php5-json brainy-php5-mbstring brainy-php5-mcrypt brainy-php5-modules-base brainy-php5-mysql brainy-php5-pgsql brainy-php5-pdo brainy-php5-xml brainy-php5-zendopcache brainy-php5 brainy-php5-process
systemctl restart brainyphp-fpm
Код: Выделить всё
ipcrm: неверный id (52)
ipcrm: неверный id (53)
ipcrm: неверный id (54)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (55)
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator webroot, Installer None
Renewing an existing certificate
ipcrm: неверный id (32768)
ipcrm: неверный id (32769)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (32770)
ls: невозможно получить доступ к 'b%%%n.ru*': Нет такого файла или каталога
ipcrm: неверный id (32779)
ipcrm: неверный id (32780)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (32781)
Failed to restart dovecot.service: Unit dovecot.service not found.
ipcrm: неверный id (32790)
ipcrm: неверный id (32791)
ipcrm: неверный id (32792)
ipcrm: неверный id (32793)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (32794)
sed: -e выражение #1, символ 1: неизвестная команда: `,'
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator webroot, Installer None
Renewing an existing certificate
ipcrm: неверный id (32804)
ipcrm: неверный id (32805)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (32806)
sed: -e выражение #1, символ 1: неизвестная команда: `,'
ls: невозможно получить доступ к 'j%%%k.ru*': Нет такого файла или каталога
ipcrm: неверный id (32815)
ipcrm: неверный id (32816)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (32817)
sed: -e выражение #1, символ 1: неизвестная команда: `,'
Failed to restart dovecot.service: Unit dovecot.service not found.
ipcrm: неверный id (32826)
ipcrm: неверный id (32827)
ipcrm: неверный id (32828)
ipcrm: неверный id (32829)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (32830)
sed: -e выражение #1, символ 1: неизвестная команда: `,'
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator webroot, Installer None
Renewing an existing certificate
ipcrm: неверный id (65543)
ipcrm: неверный id (65544)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (65545)
sed: -e выражение #1, символ 1: неизвестная команда: `,'
ls: невозможно получить доступ к 's%%%a.ru*': Нет такого файла или каталога
ipcrm: неверный id (65554)
ipcrm: неверный id (65555)
Failed to reload named.service: Unit named.service not found.
ipcrm: неверный id (65556)
sed: -e выражение #1, символ 1: неизвестная команда: `,'
Failed to restart dovecot.service: Unit dovecot.service not found.
ipcrm: неверный id (65565)
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator webroot, Installer None
Renewing an existing certificate
ls: невозможно получить доступ к 'v%%%s.ru*': Нет такого файла или каталога
ipcrm: неверный id (65566)
ipcrm: неверный id (65567)
Array
(
[am%%%um.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[am%%%ws.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[a%%%cx.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[bl%%%sk.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[b%%%n.ru.conf] => renewok
[d%%%s.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[de%%%to.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[de%%%in.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[j%%%k.ru.conf] => renewok
[me%%%to.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[se%%%8s.ru.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
[s%%%a.ru.conf] => renewok
[ts%%%sk.ru.conf] => Certificate not yet due for renewal , renewal date 2023-08-17
[v%%%s.ru.conf] => renewok
[xn%%%ai.conf] => Certificate not yet due for renewal , renewal date 2023-07-09
)
Код: Выделить всё
Loaded plugins: fastestmirror, priorities, versionlock
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
12: Timeout on http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock: (28, 'Connection timed out after 30001 milliseconds')
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
Код: Выделить всё
ls -l /etc/yum.repos.d
yum clean allКод: Выделить всё
ping -c2 8.8.8.8Код: Выделить всё
total 44
-rw-r--r-- 1 root root 1404 Jun 14 2021 brainy.repo
-rw-r--r-- 1 root root 1664 Nov 23 2020 CentOS-Base.repo
-rw-r--r-- 1 root root 1309 Nov 23 2020 CentOS-CR.repo
-rw-r--r-- 1 root root 649 Nov 23 2020 CentOS-Debuginfo.repo
-rw-r--r-- 1 root root 314 Nov 23 2020 CentOS-fasttrack.repo
-rw-r--r-- 1 root root 630 Nov 23 2020 CentOS-Media.repo
-rw-r--r-- 1 root root 1331 Nov 23 2020 CentOS-Sources.repo
-rw-r--r-- 1 root root 8515 Nov 23 2020 CentOS-Vault.repo
-rw-r--r-- 1 root root 616 Nov 23 2020 CentOS-x86_64-kernel.repo
Код: Выделить всё
Loaded plugins: fastestmirror, priorities, versionlock
Cleaning repos: base brainy-glibc_sb brainy-python3_sb extras myrepo-centos
: updates
Cleaning up list of fastest mirrors
Код: Выделить всё
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=110 time=4.31 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=110 time=11.1 ms
--- 8.8.8.8 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 4.319/7.709/11.100/3.391 ms
Код: Выделить всё
yum install mc
yum install brainy-php5-process
cat /etc/yum.repos.d/CentOS-Base.repoКод: Выделить всё
Loaded plugins: fastestmirror, priorities, versionlock
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
12: Timeout on http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock: (28, 'Connection timed out after 30000 milliseconds')
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/7/x86_64
Код: Выделить всё
cat /etc/yum.repos.d/CentOS-Base.repoКод: Выделить всё
cat /etc/os-release